Commercial and Applied Products
Packaged Rooftop Units (RTUs)
- Rooftop units (RTUs) from 2-150 tons
- Hot Gas Reheat for dehumidification available on most models
- VAV options from 6.5-150 tons
- Intellispeed and Single Zone VAV options from 3-150 tons
- ERV options Available
- Carrier/ICP/Bryant direct fit options from 3-27.5 tons
- Trane direct fit options from 15-27.5 tons
- 50 tons and under are designed, engineered and assembled in Norman, Oklahoma
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Split Systems / Condensing Units / Air Handlers
Unitary Split Systems
- Unitary split systems up to 50 tons
- Electric, steam and hot water heat options
- Inverter ready air handler motors
- Low ambient down to -20 degF accessory kit
- Over 12 configurations for indoor units
- Designed, engineered and assembled in Norman, Oklahoma
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Condensing Units
-
Condensing units up to 160 tons
- QCC2 15-80 tons
- QCC3 80-160 tons
- R410-a and Scroll Compressors
- Comfort cooling or process applications
- Other options: ultra quiet fans, low ambient control, bacnet, modbus or N2 control, and more.
- Perfect for matching up with chillers barrels, brazed plate heat exchangers, customs DX coils or air handlers.
- Link to technical info: http://www.quantech-hvac.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Air Cooled Chillers
- Quantech Air Cooled Chillers up to 360 tons
- QTC2 Air Cooled Chillers 15-65 tons
- QTC3 Air Cooled Chillers 40-230 tons
- Scroll Compressors and R410a refrigerant
- Normally stocked with 2-3 day delivery
- QTC4 Air Cooled Chillers 150-360 tons
- R134-a Refrigerant
- Screw Compressors
- Pump packages available on select models
- Comfort cooling or process applications
- Link to technical info: http://www.quantech-hvac.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Water Cooled Scroll Chillers
- QWC3 Water Cooled Chillers up to 200 tons
- Scroll Compressors
- All sizes fit through a 36" wide door
- Adjustable piping locations
- Comfort cooling or process applications
- Link to technical info:http://www.quantech-hvac.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Remote Condenser Scroll Chiller
- QRC3 Remote Condenser Scroll Chiller available from 50-170 tons
- Comfort cooling or process applications
- R-410A refrigerant
- Equipment to be paired with air or water cooled condenser
- Link to technical info:http://www.quantech-hvac.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Split System Chillers
- Split System Chillers up to 400 tons
- Chiller barrel and brazed plate heat exchanger options
- Comfort cooling or process applications
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Enviro-Tec Semi-Custom Air Handlers
- Model ESL available up to 50,000 cfm
- FC, Airfoil, Plenum or Fan Array
- Up to 10" ESP capability
- DX, CW, HW, Steam, Electric & Gas heat
- CV, VAV, mixing box section, UV lights and more
- 2" double wall R-13 foam injected panels standard
- Available to ship in sections for tight retrofit applications
- Link to technical info: https://www.enviro-tec.com/products/ahu-esl.html
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Air Handlers - Indoor/Outdoor Rated
- 500-7500 cfm
- 3-45 tons Direct Expansion (DX)
- 3-45 tons Chilled Water
- 75-400 mbh Natural Gas or LP (up to 93% AFUE)
- 10-120 KW Electric Heat (staged or SCR)
- Up to 908 mbh Hot Water Heat
- 2.5-5 ton Internal Dedicated Reheat Pump (for dehumidification)
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Fan Coils and Small Air Handlers
- 2 pipe and 4 pipe chilled water and DX fan coils
- Belt drive CW air handlers up to 20 tons
- Pancake units
- Ceiling recessed
- Wall/Closet mount
- Electric, steam and hot water heat options on most units
- Unit Ventilators
- Floor Exposed
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
VRF (Variable Refrigerant Flow)
- Heat Pump and Heat Recovery
- Rated to -10 degF in cooling mode and to -13 degF in heating mode.
- Changeover boxes: 1, 4, 8 and 12 port options.
- Indoor unit types: High wall, ceiling cassette, floor mount, ducted, air handler
- Technical and design info: http://smartflex-hvac.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Custom Replacement Coils
- DX (direct expansion), Hot Water, Chilled Water, Booster, Standard Steam, Steam Distributing
- Quick Build Options available
- FREE custom coil field measure with fit guarantee
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
York DOAS (Dedicated Outdoor Air System Units)
- 450-20,000 cfm
- 3-70 tons cooling capacity (DX)
- Modulating hot gas reheat
- Indirect fired gas heat: 75-1600 MBH
- Electric heat: 3.65-112.5 kW (staged or SCR)
- Integrated energy wheel options with up to full exhaust through the wheel
- Digital Scroll compressor options
- Water Source and Air Source Heat Pump Options
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Reznor DOAS (Dedicated Outdoor Air System Units)
- 650-9,000 cfm range
- 5-35 tons cooling capacity
- Modulating hot gas reheat options
- Indirect fired gas heat: 50-800 MBH
- Electric heat: 30-120 kW
- Integrated energy wheel options
- Molded double wall foam panels with slam latches
- Digital Scroll compressor options
- Plenum blower with ECM or Belt Drive with VFD
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
VAV Boxes (Terminal Units)
- Single Duct
- Series Fan Powered (Constant fan)
- Parallel Fan Powered (Intermittent fan)
- Cooling Only, Electric Heat, Hot Water Heat
- Linear inlet sensor
- PSC or ECM Motors
- Verasys controls factory installed
- Tech info: https://www.johnsoncontrols.com/buildings/air-systems/variable-air-volume-terminals
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Verasys™ Controls
- Seamless integration with York RTU's and split systems
- Integrates with any brand of equipment
- CV, VAV, Change Over Bypass (COBP)
- IOM module – control chillers, boilers, fan coils, refrigeration units, and lighting.
- Web based software
- Email and texting alerts
- Fault detection and diagnostics (FDD) including remote monitoring of refrigerant temperatures and pressures (Superheat & Subcooling)
- Wireless sensor options
- Tech info: http://www.york.com/for-your-workplace/packaged-and-split-dx-systems/smart-controls/verasys
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Semi Hermetic Compressors
- Reciprocating & Screw compressors
- Always Remanufactured, Never Rebuilt®
- Most models in stock at cfm or at the factory
- Carrier, Carlyle, Copeland, Dunham Bush, York, Trane, Liebert, Tecumseh, Worthington and more!
- Meets ISO9001 standard
- More info: http://nationalcompressor.com/
If you have questions or would like a quote, please call us at (800) 322-9675, or email us at commercial@cfmkc.com
Applied Systems Group
Brad Telker
Vice President of Sales, Applied Systems Group
- Cell: 913-980-3454
- Email: b.telker@cfmkc.com
Why Applied Systems Group?
When you work with an Applied Systems Group Sales Engineer, you are working with someone who is a graduate engineer with either a mechanical, industrial or chemical engineering background. We have studied heat transfer, thermodynamics, psychrometrics, etc and understand not only how load calculations work, but we understand how the refrigeration circuit works. We help with site visits, load calculations, code review, ROI calculations and equipment application review and we will keep you out of trouble and prevent you from having a bad job.
Applied Systems Design/Build Suite
Site Visits
Load Calculation Assistance
Energy Analysis Assistance
Heating and Cooling Payback and ROI Analysis
Humidity and Dehumidfication calculation and design Assistance
Custom Coil Measurement and Design Assistance
Refrigerant piping and line set design and selection
Ductwork Design Assistance
Note: The above services are free for our customers and prospective clients.